Welcome to the Bargain Basement!
Bargain basement items are either overstock, closeout or imperfect packaging.
All bargain basement products are guaranteed to be in brand-new condition and carry any and all manufacturer warranties.
This is the Futaba 3PM FM 75MHz 3-Channel Surface Computerized Pistol
Grip Radio with one S3305 Heavy Duty Servo.
FEATURES:
10-Model Memory
Alphanumeric LCD Screen with high intensity Blue LED monitor,
can be changed to three different brightness levels.
Condition 2 selection allows two rates to be set up and switched with
SW1 switch simultaneously during a run
Alarm buzzer
Model copy and clear functions
ABS Braking
Brake mixing for large cars
One-channel program mixing
Steering and throttle Expo
Servo reversing on all channels
End Point Adjustment (EPA) for all channels
Multi-function timer up/down with lap memory
Steering Dual Rates
Throttle ATL
Digital Trims
Function Select dial/switch
Steering Speed
Charge Jack for optional NiCds
One Year Warranty
INCLUDES:
One 3PM FM Transmitter
One R153F FM micro receiver FUTL0364
One crystal set FUTL97** (75MHz)
One S3305 Heavy Duty Servo (FUTM0045)
One receiver battery box w/"J"connecter (No Number)
One switch harness (FUTM4350)
Two accessory package w/rubber grommet, screw, brass eyelet (FUTM3551
One frequency flag set (No number)
One instruction manual (No number)
* Optional Transmitter NiCd NT8F700B: (FUTM1462) or FUTM1440
* Optional Receiver NiCd: (FUTM1295)
* Optional NiCd Charger: (FUTM1830)
REQUIRES:
Installing servo and batteries
12 AA batteries (order 3 FUGP7300)
SPECS:
Transmitter;
Power Requirement: 8 AA cells or NT8F700B NiCd battery
Current Drain: 250mA or less
R153F Receiver;
Power Requirement: 4.8V or 6V (shared with servos)
Length: 1.5" (37.7mm)
Width: 1" (25.4mm)
Height: .6" (14.3mm)
Weight: .50oz (14.1g)
S3305 Servo;
Weight: 1.64oz (46.5g)
Speed: .25 sec/60° @ 4.8V
.20 sec/60° @ 6V
Torque: 124 oz-in (8.9 kg-cm) at 6V
99 oz-in (7.1 kg-cm) at 4.8V
COMMENTS:
If you would like to use optional NiCds with your transmitter, we
recommend an assembled pack, not individual cells. If individual
NiCd cells are used the battery tray could be damaged during
charging.
